Not linked to the appBeep: press StartFine tune 0 ms
Point the camera that feeds SyncOrSwim at this screen. The strip is a clock; once a second the phone also plays a beep.
Photosensitivity warning. The pattern is a fast-changing black and white strip with a flash once a second. Do not use it if flashing lights can trigger seizures for you or anyone near the screen.
The big button starts the clock and beeps and shows the pattern full screen: turn the phone sideways (switch off rotation lock if it will not turn). "Back to setup" on the pattern returns here. "Start" alone runs it here with a small preview while you measure or tune the beep.
--
running
Beep timing
Press Start to see how much the beep is brought forward.
Not measured with the microphone. The beep is timed from what the browser says about this phone.
Turn the phone's volume to maximum first. The beep is as loud as a web page can make it; the rest is the phone's volume and speaker.
Plays 8 short chirps and listens to them with this phone's microphone. Needs a fairly quiet room, volume about 70%, and the phone's speaker (or the speaker/headphones you will actually use) in earshot.
Asks the browser what it knows about this phone's audio (output delay, microphone delay, sound route) and shows where each number came from.
Fine tune0 ms
Set exactly
Positive makes the beep later, negative makes it earlier. Saved on this phone. No phone can know its own screen and speaker delay exactly, so calibrate each phone once against something you trust: put it in front of the reference path, open this page from SyncOrSwim's QR code, press "Measure phone offset" in the app's Lighthouse tab and tap "Set it" here when the suggestion appears.
Tips
Screen brightness to maximum, auto-brightness off, auto-lock off (this page asks the phone to stay awake).
Fill as much of the camera picture with the strip as you can; SyncOrSwim finds it anywhere in the picture.
Do not use a screen protector with heavy glare; hold the phone still.